+1 (562) 684-4928
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.
WHAT'S IN THE PACK:
RADIAL HI-FLO TUBE: either 75ft or 150ft
10:10 PUSHFIT: enables you to connect any two lengths of HI-FLO
10 PUSH-FIT to GARDENA MALE (gives you the flexibility to connect to any fitting with GARDENA FEMALES)
COLLAR LOCKS: prevent any PUSH-FIT from coming open unintentionally.
WHEN TO USE:
HI-FLO can be used along the ground for 75-150 FEET to have a more convenient delivery hose, AND up the pole right to the #1 clamp, or straight to your RADIAL brush!
SPECIFICATIONS:
RADIAL HI-FLO is 10mm (approx 3/8") OD tube.
REMEMBER : The longer the tube or hose, no matter the ID, the less flowrate will be available at the brush, so always use the shortest practical length, transporting water with the largest practical ID. Typically, stepping down the ID over distance preserves flowrate better (so use 150FT (50m) 5/8" (16mm), then 150FT (50m) 3/8" (10mm) over long distances).Our target is 1/2GPM (2LPM) at the RADIAL BRUSH.
HI-FLO PACK:
This pack is designed to give you the maximum flowrate through HI-FLO TUBE to your RADIAL brush.
If you choose 150FT, we give you another 10:10 PUSH-FIT ADAPTOR so you can cut HI-FLO into two lengths (eg. 75/75 or 100/50) and easily re-join them for longer run situations. Remember to reconnect and use the COLLAR LOCK CIR-CLIPS to avoid unintentional disconnection.
HI-FLO is designed for delivering more water to all RADIAL BRUSHES. We know categorically that you can USE LESS TIME by using more FLOW-RATE during the ON-GLASS-RINSE phase. Overall, if you accelerate your work at a higher rate than the increase in flow-rate, you will actually USE LESS WATER VOLUME.
You CAN use HI-FLO on a reel.
